Bulletin:  SK1030
Vendor:    Kantronics
Subject:   CR/LF Problems In AMTOR Mode

Some KAM users have received reports that while in the AMTOR mode, their
transmitted text did not contain carriage returns or line feeds (CR/LF).
Some KAM users have referred this problem to KANTRONICS as a firmware bug.
And some folks that see the text refer to the text as "KAMESE".

If you are using a KAM with 4.0 firmware, these settings should give you the
correct CR/LFs and will display the actual out-going text (including the CR/LF)
as it is transmitted in real-time AMTOR ARQ, FEC, and/or RTTY.

These settings assume that you are using standard terminal software. I have
not checked these settings with HOSTMASTER - Kantronic's KAM software program.

Note these settings also shift up in frequency the audio tones of MARK and
SPACE so as to be in the middle of the audio passband of most HF radios. This
usually provides a signifigant performance improvement - especially for HF Pkt.

8BITCONV ON
AUTOCR 72
AUTOLF ON
AUTOSTRT OFF
CCITT ON
CD INTERNAL/INTERNAL
CR ON
CRADD ON
CRLFSUP OFF
DIDDLE ON
ECHO ON
FLOW OFF
FSKINV OFF
FULLDUP OFF
HEADERLN OFF
INTFACE TERMINAL
LCOK ON
LCRTTY OFF
LFADD ON
MONITOR ON/ON
MARK 2110
MYC <Your call sign here>
MYSEL4 <Your Selcall here>
NEWMODE ON
NOMODE OFF
NUCR 0
NULF 0
RELINK OFF/OFF
REPHASE  ON
RESPTIME 5/5
SPACE 2310
TRACE OFF
TRFLOW OFF
TRIES 0
TXDELAY 20/20
TXDAMTOR 5
TXDFEC 0
TXFLOW OFF
XFLOW ON
XMITECHO ON
(all other settings at factory default or personalized via your call sign)

John/WD1V  Manchester, NH