Bulletin:   SK1200
Vendor:     Alinco
Subject:    DR-1200T 9600 BAUD MOD

THE PROCEEDURE TO MODIFY YOUR 1200T
FOR 9600 BAUD USING THE MIC CONNECTOR!
ALINCO SAYS THE WARRANTY IS VOID IF YOU PERFORM THIS MOD BUT FEELS THE INFO
IS CORRECT.  I WAS ALSO TOLD THAT THE RADIO IS NO LONGER GOOD FOR VOICE OR
DATA RATES SLOWER THAN 9600 BAUD.  GOOD LUCK AND BE CAREFUL!!!!

                              TRANSMITTER
REMOVE R-31
REMOVE C-40.  REINSTALL ONE LEG OF C-40 TO PIN 7 ON THE VCO BOARD.
              CONNECT A JUMPER FROM THE OTHER FREE LEG OF C-40 TO THE HOT
              END OF C-35.
THE MIC INPUT IS NOW CONNECTED DIRECTLY TO THE VCO.


                                RECEIVER

DISCONNECT THE PINK WIRE THAT GOES BETWEEN THE MIC CONNECTOR AND THE PC BOARD
FROM THE PC BOARD AND RECONNECT IT TO PIN 2 OF THE IF BOARD CONNECTOR.

THIS ELIMINATES THE LOW PASS FILTERING ON THE DISCRIMINATOR.