Bulletin: SM450
Vendor:   Yaesu
Subject:  FT-5200 Cross Band Repeat Modifications


Remove all power to the unit.

Remove the control head and set it aside. (never open it!)

Remove 12 screws that hold on the top and bottom covers.

Remove the 2 silver screws that hold the control head mounting plate.

Remove the plate.

you will see jumper pads on the circuit board, remove the jumper from
# 17 (it is just to the right of #19) this enables cross band repeat.

Reassemble the radio.


******** REMEMBER DO NOT OPEN THE CONTROL HEAD!!!!