FT1000 GENERAL COVERAGE TRANSMIT MOD
------------------------------------
1. REMOVE POWER AND ANT.
2. OPEN CASE TOP AND BOTTOM.
3. LOCATE FOUR SCREWS ATTACHING FROUNT PANEL AND REMOVE THE TOP SCREWS.
   LOOSEN THE BOTTOM SCREWS.
4. TILT FROUNT PANEL FORWARD.
5. ON THE LEFT SIDE OF THE RADIO, REMOVE THE PLUG FROM POWER SUPPLY TO
   THE FROUNT PANEL. (GRAY AND WHITE WIRES.)
6. LOCATE THE JUMPER POSITION 3 ON CONTROL BOARD.
7. CHANGE THE JUMPER STATUS IN POSITION 3.
8. REASSEMBLE RADIO.
9. RESET CPU.

TS950SD GENERAL COVERAGE TRANSMIT MOD
-------------------------------------
1. REMOVE POWER AND ANT.
2. REMOVE TOP AND BOTTOM COVERS.
3. LOCATE THE DIGITAL UNIT.
4. CUT DIODE D-17
5. REASSEMBLE RADIO.
6. RESET CPU.

IC-781 GENERAL COVERAGE TRANSMIT MOD
------------------------------------
1. REMOVE POWER AND ANT.
2. REMOVE SCREWS OPEN CASE.
3. LOCATE AND CUT RESISTOR R80 ON LOGIC B BOARD.
4. RESET CPU.
5. REASSEMBLE RADIO.

FL-7000 10 METER TRANSMIT MOD
-----------------------------
1. REMOVE POWER AND ALL OTHER CABLES.
2. REMOVE 4 SCREWS FROM TOP COVER.
3. REMOVE TOP COVER AND RIGHT AND LEFT PANELS.
4. REMOVE 4 SCREWS FROM POWER COMBINER UNIT AND REMOVE SCREEN PLATE.
5. LOCATE SWITCH SO1 ON THE CPU UNIT AND SET TO OFF POSITION ( A SMALL
   SCREWDRIVER CAN BE USED TO REACH SWITCH)
6. REASSEMBLE UNIT.